** The WORLD's FIRST zero charge, zero calibration, zero service 4 gas...
The new BW Clip4 - 4 gas LEL, O2, H2s,CO , never requires charging runs...
Bringing an easy-fix solution anywhere magnetic.
A unique monitor that only requires calibration every 12 months, and...
The Max Clip Stud exclusively for the MGC SIMPLE multi gas detector,...
A unique monitor that only requires...
A unique monitor that only requires calibration every 12 months, and with a battery run time of 2 months continously, or 4 months if turned off at night, this is a unique detector that will save you time and money.
Also does not require oxygen present to operate safely( like normal pellister sensor units)
|50||20%||Up to £ 5,650.00|
|25||15%||Up to £ 2,118.75|
|10||10%||Up to £ 565.00|
|5||5%||Up to £ 141.25|
** ONLY REQUIRES CALIBRATION EVERY 12 MONTHS *** with this IR LEL sensor.
Day in, day out, your workers have to charge their portable multi gas detectors so they can keep testing for the presence of combustible gases, H2S, CO, and O2. Unfortunately, sometimes they may forget to do so. Gas Clip Technologies can help prevent this safety risk with our new Multi Gas Clip (MGC). It has the longest battery life of any portable gas detector by a long shot.
The new MGC can go a full 2 months without a charge, even without ever having to be turned off. Shut down the unit nightly and the battery can last up to 4 months. What’s the secret of the MGC’s extended battery life? It uses low-power photo-metric technology for the detection of the combustible gases (LEL). Instead of draining the battery with archaic pellistor technology, the MGC uses an IR source. This conserves power, so the battery lasts and lasts and lasts.
The MGC also eliminates the need to frequently calibrate portable gas detectors. It can go 12 months without being calibrated. That saves time and increases efficiency. Each Multi Gas Clip, IR version, comes with the following features:
|Size||4.7” H × 2.4” W × 1.2” D|
(118.6 mm H × 61.6 mm W × 31.7 mm D)
|Weight||7.7 oz. (240 g)|
|Temperature||-4°F to +122°F / -20°C to +50°C|
|Humidity||5% to 95% RH (non-condensing)|
|Battery Life||IR: 2 months continuous|
Pellistor: 30 hours
|Alarms||Visual, Vibrating, Audible (minimum 95dB)|
Low, High, STEL, TWA and OL (Over Limit)
|LEDs||4 red alarm bar LEDs|
Yellow backlight (activated on button press)
Red backlight (activated on alarm condition)
Yellow Maintenance Notification LED
|Tests||Full function self-test upon activation|
Sensors, battery and circuitry continuous
|Ingress Protection||IP 67|
|Certifications||CSA: Class 1 Div 1 Groups A, B, C and D|
CAN/CSA C22.2 No. 157 & C22.2 No. 152
ANS/UL 913 and ANSI?ISA-S12.13 Part 1
ATEX: CE Sira 14ATEX2013 II 1 G, Ex ia IIC T4 Ga
InMetro: IECEx:Ex: EXia IIC T4 GA
|Warranty||Full 2 years|
|Gases||H2S: 0-100 PPM|
CO: 0-500 PPM
Combustible: 0-100 %LEL
O2: 0-30 %
No customer comments for the moment.